This guide is for laser cut metals only. Looking for PCM metals instead? Go here
File includes only the profile that is to be cut
Remove any instructions, dimensions, scales, and borders from your file. You should only upload what you want cut out.
File contains only 1 part
Upload your parts as individual file and we'll take care of the nesting at our end. Use the quantity field to specify how many copies of each you'd like.
Minimum part size
Parts smaller than 1” can fall through the laser bed and be lost. Check the minimum parts size measurements on each material page in the materials catalog.
Minimum feature size
The positive features of your design should be no smaller than 1x the material thickness. Check the minimum feature size measurements for the thickness you wish to use on the material page in the materials catalog.
Minimum hole size
Holes and cut outs should be no smaller than 1.5x the material thickness. Check the minimum feature size measurements for the thickness you wish to use on the material page in the materials catalog.
All paths must be closed shapes.
Make sure all your paths are connected and there are no gaps in the lines.
Ensure shapes are connected and there are no shared cutting lines
Check your design to make sure no two parts are touching or sharing a line. Be sure that no lines overlap or intersect with each other.
Ensure there are no nested shapes.
A metal laser needs space to pierce and lead into the profile that is to be cut out. Ensure that parts are individual and not nested within a larger shape.
Type has been stencilized or has bridges to hold the centers in place.
The centers of letters will be lost if they are not connected to the larger sheet of material. The width of the bridge should be equal to the thickness of the material.